LOGIQ LED Dimmer 100W | socket combination, light control

LED dimmer switch max. 100W, for inductive and resistive loads, cable connection via plug-in terminals, individually or in combination with a socket
item number: 10041511
from 45.69
 
incl. VAT excl. shipping cost
package
 
technical details:
- type: dimmer rotation change
- color: white/titan/anthracite
- material: plastic
- glossy, smooth surface
- universal design, fits many interior styles
- operation only at 230V/50Hz
- ON/OFF by push button
- power of inductive loads (e.g.: LEDs): 0-100W (max. 10 LEDs)
- power of resistive loads (e.g.: light bulb): 10-250W
- can be connected to toggle switch
- no combination of 2 dimmers possible
- dimming function via rotary switch
- dimmer button diameter: approx. 48mm
- electronics fuse (replaceable)
- type of installation: flush-mounted (claw/screw fastening)
- suitable for cavity wall sockets and flush-mounted switch boxes
- cable connection via plug-in terminals, 1.5-2.5mm²
- protection class: IP20
- all details according to manufacturer

LOGIQ LED dimmer switch, without frame
- dimensions: approx. 71x71x54mm (w-h-d)
- without flush-mounted frame

LOGIQ LED dimmer switch with socket
- socket with cable connection via plug-in terminals and plug-in protection / shutter
- dimensions: approx. 164x93x54mm (w-h-d)
- with 2-fold flush-mounted frame

Your order includes:
- 1x LOGIQ LED dimmer switch, white, without frame or
- 1x LOGIQ LED dimmer switch with socket, white, with 2-fold frame or

- 1x LOGIQ LED dimmer switch, titan, without frame or
- 1x LOGIQ LED dimmer switch with socket, titan, with 2-fold frame or

- 1x LOGIQ LED dimmer switch, anthracite, without frame or
- 1x LOGIQ LED dimmer switch with socket, anthracite, with 2-fold frame

Technical info

white
titanium
anthracite
LOGIQ series
plastic
230V
IP20

Safety instructions and important information!
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5 mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point> 200 ° C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.

* all prices including VAT and excluding shipping cost; minimum order 10 euros
** Valid for deliveries for standard shipping within Germany. Delivery times for other countries and information on the calculation of delivery, see here.
highlight-led
  • Payment via bank transfer
LED-FAQ
contact
about us