We send free shipping within Germany!
Surface-mounted protective socket | 4-fold, for outdoor
Surface-mounted socket for outdoor use with 4x sockets, flame-retardant rubber housing, dimensions approx. 270x68x50mm (l-w-h), for cable types H05VV-F 3x 1.0mm² or 3x 1.5mm²
item number: 10033265
- material: rubber
- color: black
- flame retardant housing
- number of sockets: 4
- power socket: 250V AC/16A
- operation only at 230V/50Hz
- dimensions base plate: approx. 270x68x4mm (l-w-h)
- total height: approx. 5cm
- built-in rubber cable gland
- for horizontal or vertical mounting
- for cable types H05VV-F 3x 1.0mm² or 3x 1.5mm²
- cable connection via screw terminals
- protection class: IP44
- 45° angle for easy insertion
- with hinged lid
- with suspension eye and four mounting holes
- for inside and outside
- all details according to manufacturer
- color: black
- flame retardant housing
- number of sockets: 4
- power socket: 250V AC/16A
- operation only at 230V/50Hz
- dimensions base plate: approx. 270x68x4mm (l-w-h)
- total height: approx. 5cm
- built-in rubber cable gland
- for horizontal or vertical mounting
- for cable types H05VV-F 3x 1.0mm² or 3x 1.5mm²
- cable connection via screw terminals
- protection class: IP44
- 45° angle for easy insertion
- with hinged lid
- with suspension eye and four mounting holes
- for inside and outside
- all details according to manufacturer
Technical info
anthracite/black
rubber
230V
IP44
Safety instructions and important information!
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
