1-phase electricity meter, energy meter | DIN rail TH-35

1-phase electricity meter, 100A, rated voltage 230V AC, for mounting on DIN rail TH-35, protection class IP51 - protected against dust and dripping water
item number: 10043459
from 21.49
 
incl. VAT excl. shipping cost
letter standard delivery
 
technical details:
- housing: plastic
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- rated voltage: 230V AC, 50/60Hz
- starting current: approx. 0.001A
- minimum current: approx. 0.25A
- base current: approx. 5A
- limit current: approx. 100A
- pulse frequency: 1000imp/kWh
- measurement mode: active and reactive power, consumed and derived power
- LCD displays: active energy, energy input, reactive energy, voltage, current, active power, reactive power, apparent power, frequency
- blue backlight
- connection via screw terminals
- connection cable cross-section: max. 2.5mm²
- dimensions: approx. 72x18x95mm (h-w-d)
- working temperature: -25°C ... +70°C
- storage humidity: < 95%
- compatible with renewable energy sources
- signaling of current direction
- protection class: IP51
- all details according to the manufacturer

1-phase electricity meter, 100A, MID, RS-485:
- lithium battery for real time clock
- RS-485 port for remote reading over a wired network

1-phase electricity meter, 100A, MID, RS-485, multi-tariff
- lithium battery for real time clock
- RS-485 port for remote reading over a wired network
- 4 independent tariffs (multi-tariff), different times can be set via the RS-485 connection

Your order includes:
- 1x 1-phase electricity meter, 100A, MID, DIN rail or
- 1x 1-phase electricity meter, 100A, MID, RS-485, DIN rail or
- 1x 1-phase electricity meter, 100A, MID, RS-485, multi-tariff

Technical info

white
Accessories
plastic
230V
IP50

- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.

* all prices including VAT and excluding shipping cost; minimum order 10 euros
** Valid for deliveries for standard shipping within Germany. Delivery times for other countries and information on the calculation of delivery, see here.
highlight-led
  • Payment via bank transfer
LED-FAQ
contact
about us