We send free shipping within Germany!Ceiling-mounted motion detector 360° | LED suitable | IP20
power range: 400/800W,
motion detection: 8m,
detection range: 360°,
protection class: IP20
item number: 10016655
- voltage: 230V
- power range 1-800W for resistive loads (incandescent)
- power range 1-400W for inductive loads (LED bulbs)
- detection range: max. 360 °
- motion detection: up to 8m
- switching time: 10s-30min (adjustable)
- twilight switching threshold adjustable
- connecting the cables with luster terminals, 3-wire connection
- protection class: IP20
- outside diameter: about 80mm
- installation diameter: approx. 61mm
- installation depth: approx. 30mm
- dimensions of construction frame: approx. 80x25mm (ØxH)
- case: plastic, white
- installation height for ceilings: 2,2-4,0m
- minimum load: approx. 1W
- power (standby): about 0.1W
- power (operating state): approx. 0.5W
- all details according to manufacturer
- power range 1-800W for resistive loads (incandescent)
- power range 1-400W for inductive loads (LED bulbs)
- detection range: max. 360 °
- motion detection: up to 8m
- switching time: 10s-30min (adjustable)
- twilight switching threshold adjustable
- connecting the cables with luster terminals, 3-wire connection
- protection class: IP20
- outside diameter: about 80mm
- installation diameter: approx. 61mm
- installation depth: approx. 30mm
- dimensions of construction frame: approx. 80x25mm (ØxH)
- case: plastic, white
- installation height for ceilings: 2,2-4,0m
- minimum load: approx. 1W
- power (standby): about 0.1W
- power (operating state): approx. 0.5W
- all details according to manufacturer
Technical info
indoor area
built-in
assembly
ceiling / wall
standard
IP20
Please make sure that the power range is not exceeded, depending on the connected bulbs 400 (LED) or 800 Watt (incandescent bulbs). Connect the motion detector with at least 1.5mm² cable. To avoid overheating of the electronics inside, the detector must not be covered. Installation should only be carried out by trained electricians. The applicable accident prevention regulations must be observed. To avoid an electric shock, you should completely switch off the power circuit in which the installation is carried out at the main fuse during all work! Otherwise there is a RISK OF LIFE!!
- Payment via bank transfer