We send free shipping within Germany!FLAIR IR motion detector 160°, 1-500W | socket combination
IR motion detector with socket, for resistive and inductive loads, with fastening claws for flush-mounted device sockets, individually or as a combination
item number: 10037522
technical details:
- type: IR motion detector, 3-wire technology
- color: anthracite
- material: plastic
- operation only on 230V/50Hz
- slide switch for permanent light, light off and light on when moving
- maximum load with ohmic loads (incandescent lamps): 1-500W
- maximum load with inductive loads (LED lamps): 1-200W
- switching time: 10 sec - 7 min (adjustable)
- sensitivity: 3-2.000 lux (adjustable)
- coverage angle: 160°
- range: max. 9m
- 3-wire technology, suitable for parallel connection
- installation via screw terminals
- maximum power socket: 250V~/16A
- socket with plug protection / shutter
- dimensions with 1-fold frame: approx. 80x80x30mm
- dimensions with 2-fold frame: approx. 150x80x40mm
- compatible with all components of the "Flair" series
- mounting type: flush mount (claw/screw fastening)
- suitable for cavity wall sockets and flush-mounted switch boxes
- protection class: IP20
- all details according to manufacturer
Your order includes:
- 1x FLAIR IR motion detector, white, with frame or
- 1x FLAIR IR motion detector, white, with socket or
- 1x FLAIR IR motion detector, anthracite, with frame or
- 1x FLAIR IR motion detector, anthracite, with socket
- type: IR motion detector, 3-wire technology
- color: anthracite
- material: plastic
- operation only on 230V/50Hz
- slide switch for permanent light, light off and light on when moving
- maximum load with ohmic loads (incandescent lamps): 1-500W
- maximum load with inductive loads (LED lamps): 1-200W
- switching time: 10 sec - 7 min (adjustable)
- sensitivity: 3-2.000 lux (adjustable)
- coverage angle: 160°
- range: max. 9m
- 3-wire technology, suitable for parallel connection
- installation via screw terminals
- maximum power socket: 250V~/16A
- socket with plug protection / shutter
- dimensions with 1-fold frame: approx. 80x80x30mm
- dimensions with 2-fold frame: approx. 150x80x40mm
- compatible with all components of the "Flair" series
- mounting type: flush mount (claw/screw fastening)
- suitable for cavity wall sockets and flush-mounted switch boxes
- protection class: IP20
- all details according to manufacturer
Your order includes:
- 1x FLAIR IR motion detector, white, with frame or
- 1x FLAIR IR motion detector, white, with socket or
- 1x FLAIR IR motion detector, anthracite, with frame or
- 1x FLAIR IR motion detector, anthracite, with socket
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
-The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C)!
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE!
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
-The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C)!
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE!
- Payment via bank transfer