Flush mount motion detector, 2 poles, 160°, silver
This motion sensor with a minimum load of just 1W turns on your LED lighting too.
item number: 60000398
Your Light. Our Service. Your Benefits with the LED Specialist Retailer
-
Personal consultation +49 (0) 36338 59889-00
-
Own warehouse in the heart of Germany
-
Shipping within 24 hours
-
Free shipping within Germany
-
Shipping with Deutsche Post, DHL & DPD
-
Over 800,000 satisfied customers
-
More than 10,000 items available immediately
-
Over 20 years of e-commerce experience
This motion sensor with a minimum load of just 1W turns on your LED lighting too. Create more comfort and safety in your living room, hallway or basement. The 2 pole connector makes the installation very simple. Due to its design it is suitable for AC circuit of two motion sensors and can also be installed in cavity wall sockets. The light sensitivity and the switching time can be adjusted according to your needs.
- detection angle: approx. 160°
- detection range: max. 9m
- minimum load: 1W
- maximum load resistive loads: 500W (eg incandescent lamps)
- maximum load inductive loads: 200W (e.g. LEDs)
- operation at 230V / 50Hz
- installation dimensions 49x49x30mm (WxHxD)
- installation height: 100-180cm
- dimensions (decorative panel): approx 80x80mm
- suitable for flush-mounted boxes Ø60mm
- suitable for cavity wall boxes Ø68mm
- switching time: about 10 seconds to 7 minutes
- sensitivity: 3-2,000 lux (adjustable)
- on / off switch / PIR
- elegant plastic housing in anthracite
- easy installation due to 2-pole connection
- switching time and light sensitivity adjustable
- LED status display
- only suitable for indoor installation
- all detailsaccording to manufacturer
- detection angle: approx. 160°
- detection range: max. 9m
- minimum load: 1W
- maximum load resistive loads: 500W (eg incandescent lamps)
- maximum load inductive loads: 200W (e.g. LEDs)
- operation at 230V / 50Hz
- installation dimensions 49x49x30mm (WxHxD)
- installation height: 100-180cm
- dimensions (decorative panel): approx 80x80mm
- suitable for flush-mounted boxes Ø60mm
- suitable for cavity wall boxes Ø68mm
- switching time: about 10 seconds to 7 minutes
- sensitivity: 3-2,000 lux (adjustable)
- on / off switch / PIR
- elegant plastic housing in anthracite
- easy installation due to 2-pole connection
- switching time and light sensitivity adjustable
- LED status display
- only suitable for indoor installation
- all detailsaccording to manufacturer
Technical info
anthracite/black
indoor area
flush mounting
standard
plastic
IP20
Copyright © World Trading Net GmbH & Co. KG