We send free shipping within Germany!Installation relays, latching relays | for DIN rail TH-35
installation relay with latching, rated voltage 16A / 24V AC/DC / 230V, for mounting on DIN rail TH-35, for indoor use only
item number: 77701043
technical details:
- housing: plastic
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- contact material: AgSnO2
- nominal voltage: 230V
- permanent current capacity: 16A
- switching capacity: 1W - 4000W
- contact current: minimum 10mA
- switching current: maximum 30A
- switching frequency: max. 600 cycles/h
- contact resistance: = 100mOhm
- switching frequency: > 0.5 x 10^5
- mechanical resistance (cycles): > 10^7
- green LED U ON - status display for voltage
- green LED U flashing - timing T
- yellow LED R ON/OFF - status of the output relay
- connection via screw terminals
- connection cable cross-section: max. 2.5mm²
- dimensions: approx. 64.6x17.5x90mm (h-w-d)
- weight: about 65g
- working temperature: -20°C ... +50°C
- storage humidity: < 85%
- protection class: IP20
- all details according to the manufacturer
installation relay, 24V AC/DC
- rated coil load: 24V DC
- rated load contacts: max. 250V/16A
installation relay, 230V AC
- rated coil load: 230V AC
- rated load contacts: max. 250V/16A
Your order includes:
- 1x installation relay with latching, 24V AC/DC or
- 1x installation relay with latching, 230V AC
- housing: plastic
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- contact material: AgSnO2
- nominal voltage: 230V
- permanent current capacity: 16A
- switching capacity: 1W - 4000W
- contact current: minimum 10mA
- switching current: maximum 30A
- switching frequency: max. 600 cycles/h
- contact resistance: = 100mOhm
- switching frequency: > 0.5 x 10^5
- mechanical resistance (cycles): > 10^7
- green LED U ON - status display for voltage
- green LED U flashing - timing T
- yellow LED R ON/OFF - status of the output relay
- connection via screw terminals
- connection cable cross-section: max. 2.5mm²
- dimensions: approx. 64.6x17.5x90mm (h-w-d)
- weight: about 65g
- working temperature: -20°C ... +50°C
- storage humidity: < 85%
- protection class: IP20
- all details according to the manufacturer
installation relay, 24V AC/DC
- rated coil load: 24V DC
- rated load contacts: max. 250V/16A
installation relay, 230V AC
- rated coil load: 230V AC
- rated load contacts: max. 250V/16A
Your order includes:
- 1x installation relay with latching, 24V AC/DC or
- 1x installation relay with latching, 230V AC
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
- Payment via bank transfer