We send free shipping within Germany!LED dimmer for toggle switch | 230V or 12V
LED dimmer for button "EM18", 230V/250W & "EM19", 9-48V DC/96W, memory function, suitable for flush-mounted boxes
item number: 10026029
technical details:
- design: LED dimmer for button
- can be connected to several buttons
- suitable for LED bulbs
- colour: white
- material: plastic
- shape: square
- soft power on/off
- with dimmer memory
- dimensions: approx. 52x52x25mm (h-w-d)
- connection cable with open cable ends
- type of installation: flush-mounted
- suitable for flush-mounted sockets
- installation of only one device in a box
- operating temperature: -5°C to +45°C
- protection class: IP20
- all details according to the manufacturer
LED dimmer for button "EM18"
- operation only at 230V/50Hz
- for dimmable lamps up to a maximum of 250W
- function 1x press: lighting on or off
- function 2x press: lighting with 50% brightness
- function 3x press: lighting with maximum brightness
- function 4x press: lighting with minimum brightness
LED dimmer for button "EM19"
- connection with all constant voltage LED power supplies and constant current LED power supplies, 9-48V DC
- for dimmable bulbs up to a maximum of 96W
- not suitable for inductive loads
- function 1x press: switch lighting on or off
- long press when the lights are on: dimming toggles between minimum and maximum brightness
- long press with backlight off: dimming increases slowly from minimum to maximum brightness
- function 2x press: lighting with 50% brightness
- function 3x press: lighting with maximum brightness
- function 4x press: lighting with minimum brightness
- function 5x press: lighting switches off after 15 minutes
- function 6x press: lighting switches off when supply voltage is below 9.8V (12V supply) or drops below 19.8 (24V supply)
Your order includes:
- 1x LED dimmer for button "EM18", 230V, max. 250W or
- 1x LED dimmer for button "EM19", 9-48V DC, max. 96W
- design: LED dimmer for button
- can be connected to several buttons
- suitable for LED bulbs
- colour: white
- material: plastic
- shape: square
- soft power on/off
- with dimmer memory
- dimensions: approx. 52x52x25mm (h-w-d)
- connection cable with open cable ends
- type of installation: flush-mounted
- suitable for flush-mounted sockets
- installation of only one device in a box
- operating temperature: -5°C to +45°C
- protection class: IP20
- all details according to the manufacturer
LED dimmer for button "EM18"
- operation only at 230V/50Hz
- for dimmable lamps up to a maximum of 250W
- function 1x press: lighting on or off
- function 2x press: lighting with 50% brightness
- function 3x press: lighting with maximum brightness
- function 4x press: lighting with minimum brightness
LED dimmer for button "EM19"
- connection with all constant voltage LED power supplies and constant current LED power supplies, 9-48V DC
- for dimmable bulbs up to a maximum of 96W
- not suitable for inductive loads
- function 1x press: switch lighting on or off
- long press when the lights are on: dimming toggles between minimum and maximum brightness
- long press with backlight off: dimming increases slowly from minimum to maximum brightness
- function 2x press: lighting with 50% brightness
- function 3x press: lighting with maximum brightness
- function 4x press: lighting with minimum brightness
- function 5x press: lighting switches off after 15 minutes
- function 6x press: lighting switches off when supply voltage is below 9.8V (12V supply) or drops below 19.8 (24V supply)
Your order includes:
- 1x LED dimmer for button "EM18", 230V, max. 250W or
- 1x LED dimmer for button "EM19", 9-48V DC, max. 96W
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- Payment via bank transfer