LED transformer/driver | 12-80W | 220-240V/12VDC | indoor

These transformers are ideal when you want to install LED’s at home. Whether in the living room, party room or bar you can now use energy-saving LED lighting. LED emitters are very sensitive and the halogen transformers change the 230V to 12V and sometimes up to 14V, which can often reduce the life of LED lights greatly. In addition, often electronic transformers start only with 20-30 watts to operate. Therefore it is advisable to use the new LED transformer as they are designed for these modern and stylish lighting. 12W LED transformer, max. 1A / 12VDC
- LED electronic transformer 12W
- input voltage: 220-240VAC, 50Hz
- output voltage: 12VDC, 1A
- dimensions: 92x41x20mm (w-h-d)
- suitable for indoor only, dry area
- connection with screw
- frame made of white plastic

30W LED transformer, max. 2.5A / 12VDC
- LED electronic transformer 30W
- input voltage: 220-240VAC, 50 / 60Hz
- output voltage: 12VDC; 2.5A
- dimensions: 170x47x37mm (w-h-d)
- suitable for indoor only, dry area
- connection with screw
- frame made of white plastic

50W LED transformer, max. 4.2A / 12VDC
- input voltage: 220-240V
- output voltage: 12V, 4,17A
- dimensions: 170x47x37mm (w-h-d)
- suitable for indoor only, dry area
- connection with screw
- frame made of white plastic

80W LED transformer, max. 6,67A / 12VDC
- input voltage: 220-240V
- output voltage: 12VDC, 6,67A
-dimensions: about 220x48x40mm (w-h-d)
- suitable for indoor only, dry area
- connection with screw
- frame made of white plastic LED transformers are technically designed for LED’s and therefor an ideal power supply for all LED applications. Unlike traditional transformers, the DC voltage is smoothed by the integrated electronics (SMPS). The connected LED’s are therefore not exposed to harmful power surges or fluctuations. Maximum life is guaranteed.

Warning: The connection of LED transformers should always be carried out by a qualified technician. The applicable accident prevention regulations must be observed. To avoid electrical shock, turn off the power before working on the unit.