technical details:
- colour: white/anthracite
- operation only at 230V/50Hz
- power: max. 250V~
- ON-/OFF-switch/PIR sensor
- detection angle: 160°
- range: max. 7m
- switching time and senstitivity adjustable
- switching time: 10 seconds up to 7 minutes
- sensitivity: 2 up to 1000 Lux
- power at ohmic load: 30-400W
- power at anductive load: 3-100W
- motion detection with screw connection
- 2-pole connector/3-pole connector
- flush mounting
- can be added on to other MILOS products
- installation depth: 35mm
- suitable for indoor use
- all details according to manufacturer
MILOS motion detector, including frame
- dimensions: 80x80mm (l-w, with frame)
MILOS safety socket with motion detector
- power socket: max. 250V~/16A
- socket with clamp connection and plug protection
- dimensions: 150x80mm (l-w, incl. frame)
Your order includes:
- 1x MILOS motion detector, white, 2-pole connector or
- 1x MILOS socket with motion detector, white, 2-pole connector or
- 1x MILOS motion detector, white, 3-pole connector or
- 1x MILOS socket with motion detector, white, 3-pole connector or
- 1x MILOS motion detector, anthracite, 2-pole connector or
- 1x MILOS socket with motion detector, anthracite, 2-pole connector or
- 1x MILOS motion detector, anthracite, 3-pole connector or
- 1x MILOS socket with motion detector, anthracite, 3-pole connector
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5 mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point> 200 ° C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.