We send free shipping within Germany!
Mini microwave motion detector "OR-CR-280" | 360°/180°
microwave motion detector 230V/1200W, detection range 360°/180°, range up to 16m, switching time and sensitivity adjustable, IP20
item number: 10052881
- housing: plastic (polycarbonate)
- color: white
- wattage range for incandescent lamps: 1 to 1200W (resistive loads)
- wattage range for LED lamps: 1 to 300W (inductive loads)
- detection range (ceiling mounting): max. 360°
- horizontal detection angle: max. 180°
- lateral range: max. 8m
- frontal range: max. 8m
- diameter range on the floor: max. 16m
- motion detection: 0.6 to 1.5m/s
- switching time: 10sec to 12min (adjustable)
- sensitivity: approx. 3 to 2000lx (adjustable)
- frequency: 5.8GHz, CW radar
- voltage: 230V
- dimensions: approx. 39.4x25x54.5mm (w-h-d)
- easy wall or ceiling mounting
- easy cable installation thanks to 3-pin connector (spring-loaded terminals)
- mounting height: wall mounting 1.5-3.5m / ceiling mounting 2-8m
- temperature range: -20°C to +50°C
- protection class: IP20
- all details according to manufacturer
- color: white
- wattage range for incandescent lamps: 1 to 1200W (resistive loads)
- wattage range for LED lamps: 1 to 300W (inductive loads)
- detection range (ceiling mounting): max. 360°
- horizontal detection angle: max. 180°
- lateral range: max. 8m
- frontal range: max. 8m
- diameter range on the floor: max. 16m
- motion detection: 0.6 to 1.5m/s
- switching time: 10sec to 12min (adjustable)
- sensitivity: approx. 3 to 2000lx (adjustable)
- frequency: 5.8GHz, CW radar
- voltage: 230V
- dimensions: approx. 39.4x25x54.5mm (w-h-d)
- easy wall or ceiling mounting
- easy cable installation thanks to 3-pin connector (spring-loaded terminals)
- mounting height: wall mounting 1.5-3.5m / ceiling mounting 2-8m
- temperature range: -20°C to +50°C
- protection class: IP20
- all details according to manufacturer
Technical info
white
indoor area
built-in
assembly
ceiling / wall
HF sensor
polycarbonate
230V
IP20
The connection should always be made by a qualified specialist. The applicable accident prevention regulations must be observed. To avoid an electric shock, switch off the power before connecting.
