Motion detector | IP44 | surface mounting | 6m | 120° | gray
IR motion detector for surface mounting in wet areas indoors or outdoors with 6m range and switching time between 5sec and 10min.
item number: 10015899
from
13.19 €
available
shipping 1 to 4 days**
our best offers
| Ab Menge | unit price |
|---|---|
| 1 | 14.49 € |
| 3 | 13.79 € |
| 5 | 13.19 € |
Your Light. Our Service. Your Benefits with the LED Specialist Retailer
-
Personal consultation +49 (0) 36338 59889-00
-
Own warehouse in the heart of Germany
-
Shipping within 24 hours
-
Free shipping within Germany
-
Shipping with Deutsche Post, DHL & DPD
-
Over 800,000 satisfied customers
-
More than 10,000 items available immediately
-
Over 20 years of e-commerce experience
- operation only on 230V/50Hz
- power: 0.5W (StandBy), 0.9W (in operation)
- switch: On-Off-PIR
- detection angle 120°
- detection range: max. 6m
- Connected load:
- 2-100W (LED lights)
- 2-500W (ohmic load)
- 2-300W inductive load)
- brightness sensitivity: 2-1000 lux (adjustable)
- switching time: 5 seconds - 10 minutes (adjustable)
- installation height: 1-1,4m
- Easy installation with 3-pin connection!
- protection code: IP44
- suitable for damp location
- elegant, scratch-resistant design
- easy to clean and maintain
- easy to install
- high quality finish
- all details according to manufacturer
- power: 0.5W (StandBy), 0.9W (in operation)
- switch: On-Off-PIR
- detection angle 120°
- detection range: max. 6m
- Connected load:
- 2-100W (LED lights)
- 2-500W (ohmic load)
- 2-300W inductive load)
- brightness sensitivity: 2-1000 lux (adjustable)
- switching time: 5 seconds - 10 minutes (adjustable)
- installation height: 1-1,4m
- Easy installation with 3-pin connection!
- protection code: IP44
- suitable for damp location
- elegant, scratch-resistant design
- easy to clean and maintain
- easy to install
- high quality finish
- all details according to manufacturer
Technical info
grey
damp room / protected outdoor area
assembly
CT IP44 gray series
plastic
IP44
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5 mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point> 200 ° C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
Copyright © World Trading Net GmbH & Co. KG