NUQUI PIR motion detector | for wet rooms, IP54
version: surface-mounted PIR motion detector,
connected load: 2-500W,
dimensions: approx. 77x62x55mm (h-w-d),
protection class: IP54
item number: 10047940
Your Light. Our Service. Your Benefits with the LED Specialist Retailer
-
Personal consultation +49 (0) 36338 59889-00
-
Own warehouse in the heart of Germany
-
Shipping within 24 hours
-
Free shipping within Germany
-
Shipping with Deutsche Post, DHL & DPD
-
Over 800,000 satisfied customers
-
More than 10,000 items available immediately
-
Over 20 years of e-commerce experience
- version: surface-mounted PIR motion detector
- vertical mounting
- material: plastic
- color: light-grey / grey
- operation only on 230V/50Hz
- power: 0.5W (standby), 0.9W (in operation)
- switch: On-Off PIR
- detection angle: 120°
- detection range: max. 6m
- connected load LED lights: 2-100W
- connected load ohmic load: 2-500W
- connected load inductive load: 2-300W
- brightness sensitivity: 2-1000 lux (adjustable)
- switching time: 5 seconds - 10 minutes (adjustable)
- installation height: 1-1.4m
- easy installation thanks to 3-pin connection
- dimensions: approx. 77x62x55mm (h-w-d)
- rubberized cable entry
- robust and weather-resistant
- protection class: IP54
- suitable for indoor and outdoor use
- all details according to the manufacturer
Note:
The front cover should be carefully removed for installation and adjustment.
- vertical mounting
- material: plastic
- color: light-grey / grey
- operation only on 230V/50Hz
- power: 0.5W (standby), 0.9W (in operation)
- switch: On-Off PIR
- detection angle: 120°
- detection range: max. 6m
- connected load LED lights: 2-100W
- connected load ohmic load: 2-500W
- connected load inductive load: 2-300W
- brightness sensitivity: 2-1000 lux (adjustable)
- switching time: 5 seconds - 10 minutes (adjustable)
- installation height: 1-1.4m
- easy installation thanks to 3-pin connection
- dimensions: approx. 77x62x55mm (h-w-d)
- rubberized cable entry
- robust and weather-resistant
- protection class: IP54
- suitable for indoor and outdoor use
- all details according to the manufacturer
Note:
The front cover should be carefully removed for installation and adjustment.
Technical info
grey
damp room / protected outdoor area
assembly
NUQUI series
plastic
IP54
Safety instructions and important information!
- Connection or installation must be carried out by qualified personnel only!
- Please never exceed the maximum connection load
. - Do not install near or even on combustible materials like wood etc.
!
- The 230V components must be connected with at least 1.5mm² wire!
- Be sure to observe the VDE and UVV (accident prevention regulations)!
- No installation on or near (50cm distance) flammable materials (ignition temperature >200°C)!
- During all work, completely switch off the circuit in which the installation is carried out at the main fuse! Otherwise there is a DANGER OF LIFE!!
- First check that the connection is correct before switching the voltage back on.
- The device may only be put into operation after a professional functional test!
- Connection or installation must be carried out by qualified personnel only!
- Please never exceed the maximum connection load
. - Do not install near or even on combustible materials like wood etc.
!
- The 230V components must be connected with at least 1.5mm² wire!
- Be sure to observe the VDE and UVV (accident prevention regulations)!
- No installation on or near (50cm distance) flammable materials (ignition temperature >200°C)!
- During all work, completely switch off the circuit in which the installation is carried out at the main fuse! Otherwise there is a DANGER OF LIFE!!
- First check that the connection is correct before switching the voltage back on.
- The device may only be put into operation after a professional functional test!
Copyright © World Trading Net GmbH & Co. KG