We send free shipping within Germany!Room temperature controller RT-55 | 110-230V, 7A, 5-30°C
Room temperature controller with separate on/off switch and digital temperature setting, for heating or air-conditioning/cooling unit, control range 5-30°C, LED function display
item number: 10034340
- material: ABS thermo-plastic
- colour: white
- suitable for heating and air conditioning or cooling (adjustable by jumper)
- operation at 110-230V~/50Hz
- suitable for 230V motorised actuators
- output relay with max. 7A
- control range: 5-30°C
- accuracy: ±0,5°C
- dimensions: approx. 75x75x31mm (w-h-d)
- LED function display
- Mounting type: surface mounting, wall mounting
- Note: temperature sensor must not be touched (very sensitive component)
- Attention: Please observe the enclosed operating instructions!
- only suitable for indoor use
- all details according to manufacturer
- colour: white
- suitable for heating and air conditioning or cooling (adjustable by jumper)
- operation at 110-230V~/50Hz
- suitable for 230V motorised actuators
- output relay with max. 7A
- control range: 5-30°C
- accuracy: ±0,5°C
- dimensions: approx. 75x75x31mm (w-h-d)
- LED function display
- Mounting type: surface mounting, wall mounting
- Note: temperature sensor must not be touched (very sensitive component)
- Attention: Please observe the enclosed operating instructions!
- only suitable for indoor use
- all details according to manufacturer
Technical info
assembly
ceiling / wall
standard
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- No installation near sources of heat or cold!
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- No installation near sources of heat or cold!
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
- Payment via bank transfer