SET 5m RGB-Stripe with power supply & controller

150 SMD-LEDs on highly flexible, self-adhesive white board, can be shortened, incl. power supply and controller
item number: 40800206
Reset variation selection
incl. VAT excl. shipping cost
letter standard delivery
shipping 1 to 4 days**
- easy assembly with adhesive backing sheet on back
- protection degree: IP44
- highly flexible
- full color intensity
- incl. LED white light function
- per meter 30 LEDs, 6.5W
- can be shortened all 3 LEDs

technical details RGB controller:
- can be loaded with 2A per color channel
- current consumption of the controller below 100mA
- requires adequate voltage supply 12V DC to the RGB application
- dimensions: 62x35x23mm (LxWxH)
- maximum range of remote control 10m
- memory function - last set program remains stored
- adjustable programs (static or alternating colors, flashing or in mountain ranges, brightness control ...)
- on/off circuit
- stroboscope function
- proportionate change in RGB colors
- fading and color changer with 3 or 7 colors
- save your own colors (6x)
- manual control of the speed

technical Details Plug-in power supply:
- input: 110-240V over Euro plug
- output 12V = above 5,5/2,1mm coax connector
- max. 3000mA
- 1.2m cable length
- positive pole in the center (not changeable)
- dimensions: 92x50x36mm (with power connector 72mm)

- all details according to manufacturer

Stick the strips in cupboards, showcases, under shelves or hanging cabinets, over a workstation or as a window border. There are no limits to your imagination! Since you can cut the strip, it is also possible to use groups of 3 or 6 as you wish.

possible areas of application:
  • as showcase lighting
  • cabinet wall lighting
  • M&furniture underbench lighting
  • kitchen row lighting
  • in the house and garden
  • as lighting for the workbench or tool shed

  • These are only examples, your creativity has no limits set!

Technical info

500 cm
Remote control
230V AC

The LED strip can be shortened after every 3rd LED, but loses its IP44 protection class.

Simplest, easiest assembly:
  • at the ends of the strip is marked 12V+ (common for all colors) and 12V- (for each individual color)
  • solder a cable to the corresponding poles
  • Connect 12V DC voltage
  • the mega light strip shines gently
  • all 3 LEDs (10cm) you can also cut the strip and find your ideal length!
  • simply cut with scissors, solder the power connection and you are done
  • for help the possible cutting lines are marked

* all prices including VAT and excluding shipping cost; minimum order 10 euros
** Valid for deliveries for standard shipping within Germany. Delivery times for other countries and information on the calculation of delivery, see here.
  • Payment via bank transfer
about us