Time relay with switching delay | for 12-240V AC/DC, 16A
time relay for switching on after a time delay, 1 time function and 8 time ranges, for mounting on DIN rail TH-35, for indoor use only
item number: 10044276
Your Light. Our Service. Your Benefits with the LED Specialist Retailer
-
Personal consultation +49 (0) 36338 59889-00
-
Own warehouse in the heart of Germany
-
Shipping within 24 hours
-
Free shipping within Germany
-
Shipping with Deutsche Post, DHL & DPD
-
Over 800,000 satisfied customers
-
More than 10,000 items available immediately
-
Over 20 years of e-commerce experience
- function: switch on after a time delay
- tripping: the relay is energized by the supply voltage
- housing: plastic
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- contact material: AgSnO2
- suitable for use with inductive loads
- number of consumers (buttons): 1
- universal input voltage (AC/DC)
- rated voltage: 12 - 240V AC/DC
- contact voltage: max. 300V AC
- power: 16A
- switching capacity: 1W - 4000W
- switching frequency: max. 600 cycles/h
- contact resistance: = 100mOhm
- switching frequency: > 0.5 x 10^5
- mechanical resistance (cycles): > 3 x 10^7
- adjustment knob for ON/OFF function + time range and time setting (delay time)
- 1 time function, 8 time ranges
- time function: ON / OFF - permanent on / off
- time ranges: 1s, 10s, 1min, 10min, 1h, 10h, 1d, 10d
- time setting: floating between 0.1 to 1
- accuracy of time setting: ± 5%
- green LED status display U for voltage and time measurement (flashing)
- yellow LED status indicator R for the status of the output relay ON/OFF
- connection via screw terminals
- connection cable cross-section: max. 2.5mm² (14 AWG)
- dimensions: approx. 64.6x17.5x90mm (h-w-d)
- weight: about 66g
- working temperature: -20°C ... +50°C
- storage humidity: < 85%
- protection class: IP20
- all details according to the manufacturer
- tripping: the relay is energized by the supply voltage
- housing: plastic
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- contact material: AgSnO2
- suitable for use with inductive loads
- number of consumers (buttons): 1
- universal input voltage (AC/DC)
- rated voltage: 12 - 240V AC/DC
- contact voltage: max. 300V AC
- power: 16A
- switching capacity: 1W - 4000W
- switching frequency: max. 600 cycles/h
- contact resistance: = 100mOhm
- switching frequency: > 0.5 x 10^5
- mechanical resistance (cycles): > 3 x 10^7
- adjustment knob for ON/OFF function + time range and time setting (delay time)
- 1 time function, 8 time ranges
- time function: ON / OFF - permanent on / off
- time ranges: 1s, 10s, 1min, 10min, 1h, 10h, 1d, 10d
- time setting: floating between 0.1 to 1
- accuracy of time setting: ± 5%
- green LED status display U for voltage and time measurement (flashing)
- yellow LED status indicator R for the status of the output relay ON/OFF
- connection via screw terminals
- connection cable cross-section: max. 2.5mm² (14 AWG)
- dimensions: approx. 64.6x17.5x90mm (h-w-d)
- weight: about 66g
- working temperature: -20°C ... +50°C
- storage humidity: < 85%
- protection class: IP20
- all details according to the manufacturer
Technical info
indoor area
Accessories
plastic
IP20
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
Copyright © World Trading Net GmbH & Co. KG