We send free shipping within Germany!
VIVO RF remote control, controller/remote control, dimmable
2-piece set with remote control & LED controller, pre-programmed, controller suitable for flush-mounted boxes, wall bracket for remote control, for indoor use
item number: 10053279
- material: plastic
- color: white
- wireless control via RF technology
- wireless control of LED lighting in 4 zones
- radio frequency: 433 MHz
- radio range: max. 10m (clear line of sight required)
- pre-programmed, ready to use
- operating voltage: 12V DC to 48V DC
- remote control power supply: 2x CR2032 batteries (included)
- power: 96W (12V DC) / 192W (24V DC) / 180W (30V DC) / 288W (48V DC)
- current: 8A (at 12–24V DC) / 6A (at 30–48V DC)
- remote control can control up to 10 control devices simultaneously
- dimming functions remote control: continuous adjustment or in 20% increments
- RF controller suitable for standard flush-mounted boxes
- wall mount for remote control
- dimensions controller: approx. 42x42x18mm (l-w-h)
- dimensions remote control: approx. 41x83x12mm (l-w-h)
- dimensions wall mount: approx. 75x90x8mm (l-w-h, without remote control)
- protection class: IP20
- all details according to manufacturer
VIVO set contents
- 1x VIVO 4-zone wireless remote control
- 1x VIVO RF controller
Your order includes:
- 1x VIVO set, RF controller + 4-zone wireless remote control or
- 1x VIVO RF controller, additional receiver
Note:
Please refer to the enclosed operating instructions for installation and the programming function.
- color: white
- wireless control via RF technology
- wireless control of LED lighting in 4 zones
- radio frequency: 433 MHz
- radio range: max. 10m (clear line of sight required)
- pre-programmed, ready to use
- operating voltage: 12V DC to 48V DC
- remote control power supply: 2x CR2032 batteries (included)
- power: 96W (12V DC) / 192W (24V DC) / 180W (30V DC) / 288W (48V DC)
- current: 8A (at 12–24V DC) / 6A (at 30–48V DC)
- remote control can control up to 10 control devices simultaneously
- dimming functions remote control: continuous adjustment or in 20% increments
- RF controller suitable for standard flush-mounted boxes
- wall mount for remote control
- dimensions controller: approx. 42x42x18mm (l-w-h)
- dimensions remote control: approx. 41x83x12mm (l-w-h)
- dimensions wall mount: approx. 75x90x8mm (l-w-h, without remote control)
- protection class: IP20
- all details according to manufacturer
VIVO set contents
- 1x VIVO 4-zone wireless remote control
- 1x VIVO RF controller
Your order includes:
- 1x VIVO set, RF controller + 4-zone wireless remote control or
- 1x VIVO RF controller, additional receiver
Note:
Please refer to the enclosed operating instructions for installation and the programming function.
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
