1-phase electricity meter, RS-485, multi-tariff | DIN rail T
1-phase electricity meter, RS-485 port, multi tariff, rated voltage 230V AC, for mounting on DIN rail TH-35, protection class IP51 - protected against dust and dripping water
item number: 10043457
Your Light. Our Service. Your Benefits with the LED Specialist Retailer
-
Personal consultation +49 (0) 36338 59889-00
-
Own warehouse in the heart of Germany
-
Shipping within 24 hours
-
Free shipping within Germany
-
Shipping with Deutsche Post, DHL & DPD
-
Over 800,000 satisfied customers
-
More than 10,000 items available immediately
-
Over 20 years of e-commerce experience
- housing: plastic
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- rated voltage: 230V AC, 50/60Hz
- lithium battery for real time clock
- RS-485 port for remote reading over a wired network
- 4 independent tariffs (multi-tariff), different times can be set via the RS-485 connection
- starting current: approx. 0.001A
- minimum current: approx. 0.25A
- base current: approx. 5A
- limit current: approx. 100A
- pulse frequency: 1000imp/kWh
- measurement mode: active and reactive power, consumed and derived power
- LCD displays: active energy, energy input, reactive energy, voltage, current, active power, reactive power, apparent power, frequency
- blue backlight
- connection via screw terminals
- connection cable cross-section: max. 2.5mm²
- dimensions: approx. 72x18x95mm (h-w-d)
- working temperature: -25°C ... +70°C
- storage humidity: < 95%
- compatible with renewable energy sources
- signaling of current direction
- protection class: IP51
- all details according to the manufacturer
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- rated voltage: 230V AC, 50/60Hz
- lithium battery for real time clock
- RS-485 port for remote reading over a wired network
- 4 independent tariffs (multi-tariff), different times can be set via the RS-485 connection
- starting current: approx. 0.001A
- minimum current: approx. 0.25A
- base current: approx. 5A
- limit current: approx. 100A
- pulse frequency: 1000imp/kWh
- measurement mode: active and reactive power, consumed and derived power
- LCD displays: active energy, energy input, reactive energy, voltage, current, active power, reactive power, apparent power, frequency
- blue backlight
- connection via screw terminals
- connection cable cross-section: max. 2.5mm²
- dimensions: approx. 72x18x95mm (h-w-d)
- working temperature: -25°C ... +70°C
- storage humidity: < 95%
- compatible with renewable energy sources
- signaling of current direction
- protection class: IP51
- all details according to the manufacturer
Technical info
no
Accessories
plastic
230V
IP50
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
Copyright © World Trading Net GmbH & Co. KG