Installation relay with latching 230V AC, 16A | DIN rail
installation relay with latching, rated voltage 16A / 230V AC, for mounting on DIN rail TH-35, for indoor use only
item number: 10044274
20.79 €
unfortunately sold out
shipping 1 to 4 days**
Your Light. Our Service. Your Benefits with the LED Specialist Retailer
-
Personal consultation +49 (0) 36338 59889-00
-
Own warehouse in the heart of Germany
-
Shipping within 24 hours
-
Free shipping within Germany
-
Shipping with Deutsche Post, DHL & DPD
-
Over 800,000 satisfied customers
-
More than 10,000 items available immediately
-
Over 20 years of e-commerce experience
- housing: plastic
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- contact material: AgSnO2
- number of consumers (buttons): 1
- rated load AC1: 16A / 250V AC
- rated load DC1: 16A / 24V DC
- nominal voltage: 230V
- switching capacity: 1W - 4000W
- contact current: minimum 10mA
- switching current: maximum 30A
- switching frequency: max. 600 cycles/h
- contact resistance: = 100mOhm
- switching frequency: > 0.5 x 10^5
- mechanical resistance (cycles): > 10^7
- green LED U ON - status display for voltage
- green LED U flashing - timing T
- yellow LED R ON/OFF - status of the output relay
- connection via screw terminals
- connection cable cross-section: max. 2.5mm²
- dimensions: approx. 64.6x17.5x90mm (h-w-d)
- weight: about 65g
- working temperature: -20°C ... +50°C
- storage humidity: < 85%
- protection class: IP20
- all details according to the manufacturer
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- contact material: AgSnO2
- number of consumers (buttons): 1
- rated load AC1: 16A / 250V AC
- rated load DC1: 16A / 24V DC
- nominal voltage: 230V
- switching capacity: 1W - 4000W
- contact current: minimum 10mA
- switching current: maximum 30A
- switching frequency: max. 600 cycles/h
- contact resistance: = 100mOhm
- switching frequency: > 0.5 x 10^5
- mechanical resistance (cycles): > 10^7
- green LED U ON - status display for voltage
- green LED U flashing - timing T
- yellow LED R ON/OFF - status of the output relay
- connection via screw terminals
- connection cable cross-section: max. 2.5mm²
- dimensions: approx. 64.6x17.5x90mm (h-w-d)
- weight: about 65g
- working temperature: -20°C ... +50°C
- storage humidity: < 85%
- protection class: IP20
- all details according to the manufacturer
Technical info
white
indoor area
Accessories
plastic
IP20
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
Copyright © World Trading Net GmbH & Co. KG